A division of the Banner Chemicals GroupTel: +44 (0)1928 597 030 | Email: pcs@bannerchemicals.com

Manual Cleaning

SamSol™ -5, -40, -60

by pcsadmin pcsadmin No Comments

BANNER POWERFUL COLD CLEANERS (SOLVENT) ; SAMUEL SOLUTION

Applications for this Product :

Banner brand
Banner brand; cleaning products
Banner brand; degreasing
Metal degreasing

Samsol 5, Samsol 40 and Samsol 60 are a series of low cost proprietary blends of isoparaffinic hydrocarbons for manual cold cleaning. In the world of cleaning, solvents with low flash points evaporate more quickly than solvents with higher flash points.

Flash points:

  • Samsol 5 = 5°C flash point (fast evaporation)
  • Samsol 40 = 41°C flash point (medium evaporation)
  • Samsol 60 = 64°C flash point (slow evaporation)

Sometimes the choice is based on government storage regulations instead of evaporation. Each of these products has been formulated to fit in a different levels of both UK and USA fire safety regulations. In that case, customers choose the solvent with the lowest flash point that regulations allow on that industrial site.

Samsol 5, 40 and 60 are all effective for the removal of oils, grease and other organic residues.

Samsol Sitrex

by pcsadmin pcsadmin No Comments

Applications for this Product :

Aerospace & Military Electronics (Avionics)
Banner brand
Banner brand; cleaning products
Banner brand; degreasing
Cleaning
Degreasing
Dewaxing
Electronics
Flux removal
Industrial cleaning
Manual Cleaning
Metal cleaning
Precision Cleaning

CITRUS-BASED SOLVENT FOR ELECTRONICS DEFLXUING AND PRECISON CLEANING

Samsol Sitrex solvent is suitable for removing a wide variety of soils in immersion or hand-wipe cleaning applications from all types of metal surfaces as well as electronics defluxing. The product will evaporate completely thus, no water rinse is required. Samsol Sitrex will remove adhesives, conformal coatings, oil, wax, grease, buffing compounds, flux residues, solder paste, asphalt, coolants, metal working fluids, mould release, silicone, tape residue and many other residues.

Samsol Sitrex is an excellent alternative to isopropyl alcohol (IPA), acetone, methyl ethyl ketone (MEK), mineral spirits and other low-flash-point flammable materials. In comparison to these solvents, Samsol Sitrex cleaner provides better cleaning performance, increased safety, less solvent consumption, and fewer VOC emissions.

EVOLVE™ CH15

by pcsadmin pcsadmin No Comments

COLD CLEANER ; NON-AROMATIC HYDROCARBON BASED

Applications for this Product :

Manual Cleaning
Precision Cleaning

Evolve Ch-15 is an aerospace approved high flash point odorless general-purpose hydrocarbon-based cold and manual wipe cleaning solvent.

Evolve CH-15 removes oils, greases, shop soils and related general contamination from all types of metal. It also removes oils and greases from most plastics and polymers without compatibility issues.

BENEFITS:

Odorless, enhancing worker comfort and ease of use
High solvency for greases and oils, equivalent to TCE
High Occupational Exposure Limit (provisional 300 ppm, 8hr TWA)
Evaporates completely without leaving residues
Conversion of cold cleaning existing equipment to use Evolve CH-15 is simple
The use of cleaning solvents with flash points below 40°C for cold cleaning are not recommended
Simple to distill and recycle
Long (36 month) shelf-life

FAQ: What is the difference between Evolve CH-10 and Evolve CH-15?

Answer: CH-10 and CH-15 are similar products; however, CH-10 has a 58°C flash point while CH-15 has a 42°C flash point. With the higher flash point, CH-10 is classified as nonflammable for storage and handling. With the lower flash point, CH-15 evaporates (dries) more quickly than CH-10. Nevertheless, the 42°C flash point is still above 40°C, which means it is not rated as highly flammable, and thus an excellent replacement for low flash point solvents such as acetone, alcohol or MPK.

EVOLVE™ CH10

by pcsadmin pcsadmin No Comments

COLD CLEANER ; NON-AROMATIC HYDROCARBON BASED

Applications for this Product :

Manual Cleaning
Precision Cleaning

Evolve Ch-10 is an aerospace approved high flash point odorless general-purpose hydrocarbon-based cold and manual wipe cleaning solvent.

Evolve CH-10 removes oils, greases, shop soils and related general contamination from all types of metal. It also removes oils and greases from most plastics and polymers without compatibility issues.

BENEFITS:

Odorless, enhancing worker comfort and ease of use
High solvency for greases and oils, equivalent to TCE
High Occupational Exposure Limit (provisional 300 ppm, 8hr TWA)
Evaporates completely without leaving residues
Conversion of cold cleaning existing equipment to use Evolve CH-10 is simple.
Classified as nonflammable for storage and handling.
Simple to distill and recycle
Long (36 month) shelf-life

FAQ: What is the difference between Evolve CH-10 and Evolve CH-15?

Answer: CH-10 and CH-15 are similar products; however, CH-10 has a 58°C flash point while CH-15 has a 42°C flash point. With the higher flash point, CH-10 is classified as nonflammable for storage and handling. With the lower flash point, CH-15 evaporates (dries) more quickly than CH-10. Nevertheless, the 42°C flash point is still above 40°C which means it is not rated as highly flammable and thus an excellent replacement for low flash point solvents such as acetone, alcohol or MPK.