A division of the Banner Chemicals GroupTel: +44 (0)1928 597 030 | Email: pcs@bannerchemicals.com

Cold Cleaning

SamSol™ DG Wipes

by pcsadmin pcsadmin No Comments

SAMUEL SOLUTION ; SOLVENT IMPREGNATED WIPES FOR MANUAL DEGREASING

Applications for this Product :

Aerospace Approvals
Banner brand
Banner brand; cleaning products
Cleaning
Degreasing
Electronics
Flux removal
Industrial cleaning
Manual Cleaning
Metal cleaning
Metal degreasing
Precision Cleaning

Manual cleaning Strong Low lint WIpes Pre-Saturated With modified Hydrocarbons.

Samsol DG Wipes are designed to clean a wide variety of residues from a wide variety of surfaces. For aerospace applications, Samsol DG Wipes are Rolls Royce approved. For electronics cleaning Samsol DG wipes will remove polar residues. The solvent features low non-volatile residue, and fast dry times. It replaces solvents such as IPA, MEK, toluene, acetone and other low flash point solvents.

Samsol DG Wipes will remove both polar and non-polar residues including greases, mineral oils, synthetic oils, lubricating oils, water-soluble oils, fingerprint salts and oils, rust inhibitors, particulate matter and dust.

  • Rolls Royce CSS No. 255 Non-Aqueous Cleaning Fluids

SamSol™ -5, -40, -60

by pcsadmin pcsadmin No Comments

BANNER POWERFUL COLD CLEANERS (SOLVENT) ; SAMUEL SOLUTION

Applications for this Product :

Banner brand
Banner brand; cleaning products
Banner brand; degreasing
Metal degreasing

Samsol 5, Samsol 40 and Samsol 60 are a series of low cost proprietary blends of isoparaffinic hydrocarbons for manual cold cleaning. In the world of cleaning, solvents with low flash points evaporate more quickly than solvents with higher flash points.

Flash points:

  • Samsol 5 = 5°C flash point (fast evaporation)
  • Samsol 40 = 41°C flash point (medium evaporation)
  • Samsol 60 = 64°C flash point (slow evaporation)

Sometimes the choice is based on government storage regulations instead of evaporation. Each of these products has been formulated to fit in a different levels of both UK and USA fire safety regulations. In that case, customers choose the solvent with the lowest flash point that regulations allow on that industrial site.

Samsol 5, 40 and 60 are all effective for the removal of oils, grease and other organic residues.

Samsol T2

by pcsadmin pcsadmin No Comments

Applications for this Product :

Aerospace Approvals
Banner brand
Banner brand; cleaning products
Banner brand; degreasing
Cleaning
Degreasing
Dewaxing
Industrial cleaning
Manual Cleaning
Metal cleaning
Precision Cleaning

MIL PRF-680 type 2 Approved cleaning solvent

Samsol T2 solvent was formulated to meet extremely strict military environmental specifications under MIL PRF-680. Type 2. This military specification is approved and widely used by all branches of the military, most aerospace OEMs and MROs including Airbus, Boeing, CFM, GE, Pratt & Whitney, Rolls Royce and many others for a wide variety of routine aerospace and military cleaning applications.

Type 2 is designated as high flash point degreaser used for hand-wiping and immersion applications. Samsol T2 can also be used in airless vacuum hydrocarbon equipment. The product will effectively remove a wide range of soils such as grease, lubricants, coolants, oils, and particulate matter. It is compatible with metal substrates and many plastics and elastomers.

  • MIL-PRF-680 Type 2 on Qualified Products List (QPL DS0026)
  • Airbus per Consumable Materials List (CML) (ref. MIL-PRF-680)
  • Airbus per A330 Maintenance Manual Item 11-002 Dry Cleaning Solvent (ref. MIL-PRF-680)
  • BAE Systems Land & Armaments TN-9-2350-34-20-1-1 & TM-9-2350-292-10 (military tanks)
  • Bell Helicopter: Part Number 2110-07015 – General solvent cleaning on Bell Helicopter Aircraft.
  • Bell Helicopter Consumable Materials item C-304
  • Boeing Aircraft Company as PSD 6-88 for BAC 5750 General Cleaning Solvent (as optional to P-D-680 specification) Reference B00074
  • Cessna Aircraft Company Model 182/T182 Maintenance Manual (alternative to PD-680 type 2)
  • CFM Aircraft Engines: CP 2011 – BREAKTHROUGH is approved for all aircraft engine cleaning applications calling for PD-680 Type I and Type II.
  • Embraer 170/175 Aircraft Maintenance Manual CPC section 07
  • Eurocopter
  • GE Aircraft Engines: C04-002 – approved for all engine cleaning applications calling for PD-680 Type I and Type II. • Goodrich Wheels and Brakes Component Maintenance Manual 2-1577 Series (Task 32-41-81-100-801-A01) per MIL- PRF-680
  • Honeywell Aerospace per MIL-PRF-680B qualifications
  • Lockheed Martin STP57-201, Rev. H Cleaning of Carbon & Low Alloy Steels (EPS G41.14) (MIL-PRF-680B supersedes P-D-680)
  • McCauley Propeller Systems 61-00-06
  • Messier-Bugatti Component Maintenance Manual 2-1577 Series (Task 32-41-81-100-801-A01) per MIL-PRF-680
  • Messier-Dowty
  • Pratt & Whitney as PMC 9001-1, -2, -7, -10 Stoddard Solvent (MIL-PRF-680, Type I, II or III)
  • Rolls Royce Aircraft Engines: Approved for all aircraft engine cleaning applications calling for PD-680 Type II.
  • Sikorsky Aircraft Corporation: Part Number 08UTC-40588 – General cleaning on Sikorsky Aircraft.
  • Testing completed: ASTM F-1110 ASTM F-483.ASTM F-945,ASTM D-130, ASTM D-1296, ASTM D- 1353.ASTM D3257,ASTM D1353

Samsol T1

by pcsadmin pcsadmin No Comments

Applications for this Product :

Aerospace Approvals
Banner brand
Banner brand; cleaning products
Banner brand; degreasing
Cleaning
Degreasing
Industrial cleaning
Manual Cleaning
Metal cleaning
Precision Cleaning

MIL PRF-680 type 1 Approved cleaning solvent

Samsol T-1 solvent was formulated to meet extremely strict military environmental specifications under MIL PRF-680. Type 1. This military specification is approved and widely used by all branches of the military, most aerospace OEMs and MROs including Airbus, Boeing, CFM, Pratt & Whitney, Rolls Royce and many others for a wide variety of routine aerospace and military cleaning applications.

Type 1 solvents have low flash points and extremely low non-residual odour. The Type 1 solvent evaporates more rapidly than the other MIL-PRF-680 types so it is the preferred solvent to use for manual cleaning The product will effectively remove a wide range of soils such as grease, lubricants, coolants, oils, and particulate matter. It is compatible with metal substrates and many plastics and elastomers.

  • MIL-PRF-680 Type 1 on Qualified Products List (QPL DS0025)
  • Airbus Consumable Materials List (CML) (ref. MIL-PRF-680)
  • Airbus A330 Maintenance Manual Item 11-002 Dry Cleaning Solvent (ref. MIL-PRF-680)
  • Boeing BAC 5750 Solvent Cleaning (optional to PD-680 specification) (PSD 6-88)
  • Honeywell Aerospace MIL-PRF-680 qualifications (Type I)
  • Lockheed Martin STP57-201, Rev. H Cleaning of Carbon & Low Alloy Steels (EPS G41.14) (MIL-PRF -680B supersedes P-D-680)
  • Pratt & Whitney PMC 9045, POP-350 Cleaning / Degreasing of metallic engine hardware using a hand wiping application.
  • United Services – United Airlines SOL3001-1
  • Rolls Royce CSS 267 (BS 245)
  • Testing completed: ASTM F-1110 ASTM F-483.ASTM F-945,ASTM D-130, ASTM D-1296, ASTM D- 1353.ASTM D3257,ASTM D1353

Samsol Sitrex

by pcsadmin pcsadmin No Comments

Applications for this Product :

Aerospace & Military Electronics (Avionics)
Banner brand
Banner brand; cleaning products
Banner brand; degreasing
Cleaning
Degreasing
Dewaxing
Electronics
Flux removal
Industrial cleaning
Manual Cleaning
Metal cleaning
Precision Cleaning

CITRUS-BASED SOLVENT FOR ELECTRONICS DEFLXUING AND PRECISON CLEANING

Samsol Sitrex solvent is suitable for removing a wide variety of soils in immersion or hand-wipe cleaning applications from all types of metal surfaces as well as electronics defluxing. The product will evaporate completely thus, no water rinse is required. Samsol Sitrex will remove adhesives, conformal coatings, oil, wax, grease, buffing compounds, flux residues, solder paste, asphalt, coolants, metal working fluids, mould release, silicone, tape residue and many other residues.

Samsol Sitrex is an excellent alternative to isopropyl alcohol (IPA), acetone, methyl ethyl ketone (MEK), mineral spirits and other low-flash-point flammable materials. In comparison to these solvents, Samsol Sitrex cleaner provides better cleaning performance, increased safety, less solvent consumption, and fewer VOC emissions.

LOW FOAM SPRAY

by pcsadmin pcsadmin No Comments

LOW FOAMING ; QUEOUS CLEANER CONCENTRATE

Applications for this Product :

General
Precision Cleaning

A silicate free, high performance aqueous parts cleaner with corrosion inhibitor.

EVOLVE™ CH15

by pcsadmin pcsadmin No Comments

COLD CLEANER ; NON-AROMATIC HYDROCARBON BASED

Applications for this Product :

Manual Cleaning
Precision Cleaning

Evolve Ch-15 is an aerospace approved high flash point odorless general-purpose hydrocarbon-based cold and manual wipe cleaning solvent.

Evolve CH-15 removes oils, greases, shop soils and related general contamination from all types of metal. It also removes oils and greases from most plastics and polymers without compatibility issues.

BENEFITS:

Odorless, enhancing worker comfort and ease of use
High solvency for greases and oils, equivalent to TCE
High Occupational Exposure Limit (provisional 300 ppm, 8hr TWA)
Evaporates completely without leaving residues
Conversion of cold cleaning existing equipment to use Evolve CH-15 is simple
The use of cleaning solvents with flash points below 40°C for cold cleaning are not recommended
Simple to distill and recycle
Long (36 month) shelf-life

FAQ: What is the difference between Evolve CH-10 and Evolve CH-15?

Answer: CH-10 and CH-15 are similar products; however, CH-10 has a 58°C flash point while CH-15 has a 42°C flash point. With the higher flash point, CH-10 is classified as nonflammable for storage and handling. With the lower flash point, CH-15 evaporates (dries) more quickly than CH-10. Nevertheless, the 42°C flash point is still above 40°C, which means it is not rated as highly flammable, and thus an excellent replacement for low flash point solvents such as acetone, alcohol or MPK.

EVOLVE™ CH10

by pcsadmin pcsadmin No Comments

COLD CLEANER ; NON-AROMATIC HYDROCARBON BASED

Applications for this Product :

Manual Cleaning
Precision Cleaning

Evolve Ch-10 is an aerospace approved high flash point odorless general-purpose hydrocarbon-based cold and manual wipe cleaning solvent.

Evolve CH-10 removes oils, greases, shop soils and related general contamination from all types of metal. It also removes oils and greases from most plastics and polymers without compatibility issues.

BENEFITS:

Odorless, enhancing worker comfort and ease of use
High solvency for greases and oils, equivalent to TCE
High Occupational Exposure Limit (provisional 300 ppm, 8hr TWA)
Evaporates completely without leaving residues
Conversion of cold cleaning existing equipment to use Evolve CH-10 is simple.
Classified as nonflammable for storage and handling.
Simple to distill and recycle
Long (36 month) shelf-life

FAQ: What is the difference between Evolve CH-10 and Evolve CH-15?

Answer: CH-10 and CH-15 are similar products; however, CH-10 has a 58°C flash point while CH-15 has a 42°C flash point. With the higher flash point, CH-10 is classified as nonflammable for storage and handling. With the lower flash point, CH-15 evaporates (dries) more quickly than CH-10. Nevertheless, the 42°C flash point is still above 40°C which means it is not rated as highly flammable and thus an excellent replacement for low flash point solvents such as acetone, alcohol or MPK.